|
|
| |
 |
|
| |
 |
 |
| These coatings and additives are used to prime surfaces before topcoating with Devcon floor coatings and to produce anti-slip surfaces for worker safety. |
|
|
| |
|
|
| |
| PRODUCT RANGES |
DESCRIPTION |
ORDERING INFO |
| Size |
Product Code |
| Concrete Primer 1000 |
NonVOC primer penetrates, seals, and protects shot-blasted or acid-etched concrete surfaces prior to the application of Floor Savers™ coatings. Improves adhesion of top coating. Acceptable for use in meat and poultry plants. |
2 gal |
12400 |
| Floor Grip™ |
Heavy-duty epoxy compound with silicone carbide granules produces an exceptional nonskid surface on walkways, ramps, loading docks, and stairs. Excellent adhesion to concrete, brick, steel, aluminum, and wet surfaces. Can be applied at temperatures as low as 40°F. Acceptable for use in meat and poultry plants. |
2 gal |
13090 |
| B-4 Acid Etch |
Environmentally-safe, citric acid etch prepares concrete surfaces for application of Floor Savers™ products. Covers approximately 480 feet² per unit. |
2 lb |
13500 |
| Safe-T-Grit™ |
Additive that can be mixed into any Floor Savers™ product to produce a nonskid surface. Stays in suspensions and prevents accidental slips and falls. |
2 lb |
12570 |
| Anti-Skid Silica (Food Grade) |
Nonskid aggregate for use with Epoxy Coat™ 7000 Non VOC, Epoxy Coat™6500 Non VOC, and Epoxy Concrete Sealer. Acceptable for meat and poultry plants. |
4 lb |
12575 |
| Z® Cold Galvanizing |
95% zinc suspension protects iron and steel from rust and corrosion in both above ground or underground applications. Easily applied by brush, roller, or spray, it provides excellent resistance to water, chemicals, and hydrocarbons. Z Cold Galvanizing qualifies under DOD Spec DOD-P-21035. |
1 qt |
12020 |
|
1 gal |
12030 |
|
|
| |
|
|
| |
|
|
|
